AED ‘On Site’ Window Sticker Large

ARC approved 297 × 210 mm vinyl window sticker, high-contrast AED iconography, weather resistant and UV stable inks, easy-apply adhesive for glass, removable without residue, suitable for shops, offices, vehicles and community hubs to signal AED availability to the public.

Peel and apply the sticker to an external-facing window or glass door so passersby and emergency services can instantly see that an AED is available. High-contrast graphics and ARC approval ensure recognisable identification, improving bystander awareness and directing rescuers to the correct location quickly.

Is this large AED sticker compliant with signage standards?

Yes. The sticker is ARC approved and uses standard AED colours and iconography to meet recognised visibility recommendations. It helps organisations demonstrate AED availability and supports public awareness, though local regulations may specify additional signage or registration requirements for emergency services.

Where should I place the AED sticker for maximum effect?

Apply to the inside face of an external window or glass door so the graphic faces outward. Position at eye level and unobstructed by displays or blinds. Ensure it is visible from the street or footpath to alert passersby and emergency responders to the AED’s presence.

Can this AED sticker be used on other surfaces?

It is optimised for glass; application to smooth plastic or metal may work but adhesion and removability can vary. Avoid porous or textured surfaces. If applying to non-glass, test a small area first and consider purpose-made signs for long-term outdoor mounting.

Will this large AED sticker withstand weather and sunlight?

Yes. Printed on durable vinyl with UV stable inks, the sticker resists fading from sunlight and tolerates typical weather exposure when applied to a protected window. For prolonged direct outdoor exposure, periodically inspect for wear and replace if the image becomes faded.

How do I apply the AED sticker without bubbles?

Clean the glass, align the sticker, peel backing a little at a time and smooth with a squeegee or credit card from centre outward. Apply slowly to avoid trapped air. If bubbles appear, lift gently and reapply or use a pin to release trapped air and smooth down.

Can this AED sticker be removed without damaging glass?

Yes. The adhesive is designed to remove cleanly from glass without leaving residue. Peel slowly at a shallow angle; if residue persists, remove with warm soapy water or a mild adhesive remover. Avoid heat or scraping that might damage painted frames.

N/A